Cisco Systems ASR 1000 Series manual Cisco ASR 1004 Router Console Port Signals and Pinouts

Appendix A Cisco ASR 1000 Series Routers Specifications

Cisco ASR 1004 Router Specifications

The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45 connectors. Cisco does not supply Category 5 UTP cables; these cables are available commercially. See Figure A-1to see an RJ-45 port and connector.

Cisco ASR 1004 Router MGMT Ethernet Port Signals and Pinouts

Table A-3lists the RJ-45 port pinout for the front panel Management Ethernet port.

Table A-10	RJ-45 Management Ethernet Port Pinouts for the Cisco ASR 1004 Router
Pin	Signal	Direction	Description
1	TX Data+	Output	Transmit Data
2	TX Data–	Output	Transmit Data
3	RX Data+	Input	Receive Data
4, 5	NC
6	RX Data–	Input	Receive Data
7,8	NC

Cisco ASR 1004 Router Console Port Signals and Pinouts

Table A-11lists the pinouts of the dual RJ-45 ports for the front panel console and auxiliary ports.

Table A-11		Console Port Pinouts for Cisco ASR 1004 Router
Pin	Signal		Direction	Description
1	RTS		Output	Request to Send (tied directly to CTS)
2	DTR		Output	Data Terminal Ready (always On)
3	TXD		Output	Transmit Data
4	GND		—	Ring Indicator
5	GND		—
6	RXD		Input	Receive Data
7	DSR		Input	Unused
8	CTS		Input	Clear to Send (tied to RTS)

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide

A-6 OL-13208-03