Cisco Systems ASR 1000 Series manual Front View, Rear View, Cisco ASR 1002 Router Components

Chapter 6 Cisco ASR 1002 Router Overview and Installation

Cisco ASR 1002 Router Description

•A built- in 4x1GE Interface providing four SFP based GE connections, designated as SPA bay 0.

Note The built-in Gigabit Ethernet ports on the Cisco ASR1002 Router support the same small form-factor pluggable (SFP) optical transceivers as the 5x1 GE SPA. For specific shared port adapter SFP compatibility listings, go to Chapter 1 in: http://cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/ASR10 00/ASRspahw.pdf

(This does not include the Ethernet management port on the Cisco ASR1000-RP1.)

The Cisco ASR 1002 Router supports upgradeable Cisco ASR1000-ESP5 or ASR1000-ESP10 assembly and the power supply modules as field-replaceable units. The Cisco embedded ASR1000-SIP10 and Cisco embedded ASR1000-RP1 assemblies are fixed into the chassis and are not upgradeable; but the shared port adapters in the SIP are field upgradable.

This section contains the following topics:

•Front View, page 6-2

•Rear View, page 6-3

•Cisco ASR 1002 Router Components, page 6-4

Front View

Figure 6-1shows the Cisco ASR 1002 Router with modules installed.

Figure 6-1 Cisco ASR 1002 Router —Front View

1 3

PWRACTV

STATSTBY

ASR1000-ESP10

ASR 1002 STAT QE0 QE1 QE2 QE3 BOOT CARRIER LINK

pwr min

stat maj

crit

C/A	C/A	C/A	C/A			US
A/L	A/L	A/L	A/L		AT
				ST
0	1	2	3	SPA-4XOC3-POS

2

PWR	STAT
	C/A	C/A	C/A	C/A			US
	A/L	A/L	A/L	A/L		AT
					ST
	0	1	2	3	SPA-4XOC3-POS			280369
	C/A	C/A	C/A	C/A			US
	A/L	A/L	A/L	A/L		AT
					ST
	0	1	2	3	SPA-4XOC3-POS

4

1	Embedded ASR1000-RP1 in the subslot and	3	SPA subslot 1
	represents the built in 4xGE SPA.
2	SPA subslot 2	4	SPA subslot 3

Note The SPAs in subslots 1-3 are field upgradeable. The SIP that the SPAs reside in is not field-upgradeable and the Cisco ASR1000-RP1 is embedded in the chassis and not field upgradeable.

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide

6-2 OL-13208-03