2-30
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Chapter 2 Cisco ASR 1000 Series Routers Components
Cisco ASR 1000 Series Router Power Supplies
Figure 2-16 Cisco ASR 1002 Router AC Power Supply
Table 2-18 describes the AC power supply LEDs on the Cisco ASR 1002 Router.
Tab l e 2-18 Cisco ASR 1002 Router Power Supply LEDs
1Chassis ESD socket 5AC power supply fan
2AC power supply slot number 0 6AC power supply captive installation screw
3AC power supply On (I) /Off (O) switch 7AC power supply slot number 1
4AC power supply LEDs 8AC power i nlet
OUTPUTINPUT
FAIL OK OK
FAN OUTPUTINPUT
FAIL OK OK
FAN
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
0
1
8 7
280288
41 5 63
2
LED Label LED Color Description
INPUT OK Power supply activity Green LED illuminates green to signal that the power supply
input voltage is greater than 85V.
None If LED is not illuminated, then the input voltage is less
than 70V or the power supply is turned off. For an AC
input voltage between 70V and 85V, the INPUT OK LED
can be either on, off, or flashing
FAN OK Bi-color LED indicates
fan status
Green LED illuminates green when all fans are operational.
Red The LED illuminates red when a fan failure is detected.
OUTPUT FAIL Power supply activity Red LED is red and turned off to signal that the DC output
voltages are within the normal operating range; output
voltage between the minimum and maximum limits will
not create an output fail alarm, and output voltages below
the minimum or above the maximum will create an output
fail alarm.