Cisco Systems ASR 1000 Series manual Cisco ASR 1006 Router Memory and Storage Options

Appendix A Cisco ASR 1000 Series Routers Specifications

Cisco ASR 1006 Router Specifications

Cisco ASR 1006 Router Memory and Storage Options

Table A-2lists the hardware memory and storage options supported on the Cisco ASR 1006 Router.

Table A-2	Memory and Storage Options for Cisco ASR 1006 Router
Memory Type		Default	Maximum System Support
RP1		2 GB DRAM	4 GBDRAM
eUSB		1 GB (Partitioned: 2x32MB for	Hard disk drive 40 GB for code storage or solid-state
		NVRAM and the remaining for	drive 32Gb support
		mass storage

Cisco ASR 1006 Router Ethernet RJ-45 Port Pinouts

The Cisco ASR 1006 Router has an RJ-45 port for the 10/100/1000 Ethernet connection. The RJ-45 port supports IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with 10BASET, 100BASETX, and 1000BASET specifications.

The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45 connectors. Cisco does not supply Category 5 UTP cables; these cables are available commercially.

Figure A-1shows an RJ-45 port and connector.

Figure A-1 RJ-45 Port and Connector for Cisco ASR 1006 Router

12345678

1

1 RJ-45 connector

57574

Cisco ASR 1006 Router MGMT Ethernet Port Pinouts

Table A-3lists the RJ-45 port pinout for the front panel Management Ethernet port.

Table A-3	RJ-45 Management Ethernet Port Pinouts
Pin	Signal	Direction	Description
1	TX Data+	Out	Transmit Data
2	TX Data–	Out	Transmit Data
3	RX Data+	In	Receive Data
4, 5	NC

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide

A-2 OL-13208-03