Cisco Systems ASR 1000 Series manual Consolidated package or individual packages, GL-2

Glossary

Control address

Cisco ASR1000-ESP5 ASR1000-ESP10 ASR1000-ESP20

Cisco ASR 1006 Router

Cisco ASR 1004 Router

Cisco ASR 1002 Router

IP address on the SBE or DBE used for terminating the H.248 control traffic between SBE and SBE.

The Cisco ASR 1000 Series Embedded Service Processors (ASR1000-ESPs) are based on the Cisco QuantumFlow Processor for next-generation forwarding and queuing in silicon. The ASR1000-ESP5, ESP10, and ESP20 provide two centralized forwarding-engine options for the Cisco ASR 1000 Series Aggregation Services Routers.

The Cisco ASR 1000 Series ESPs are responsible for the data-plane processing tasks and all network traffic flows through them. They are also responsible for features such as firewalls, intrusion prevention, Network Based Application Recognition (NBAR), and Network Address Translation (NAT).

The Cisco ASR 1006 Router is a 6-rack unit (RU) chassis. It has the option of dual route processor and embedded services processor support with 10Gbps throughput support. It also supports up to 12 shared port adapters (SPAs), which makes it the highest port density solution of the three Cisco ASR 1000 Series Routers.

The Cisco ASR 1004 Router is a 4-rack unit (RU) chassis that supports up to 8 shared port adapters (SPAs) and comes with one route processor and one embedded services processor slot. The Cisco ASR 1004 Router provides 10 Gbps throughput support.

The Cisco ASR 1002 Router is a 2-rack unit (RU) chassis that comes with an integrated route processor and a serial interface processor. It houses three shared port adapter (SPA) slots supporting half height and full height SPAs. Configurable with either the 5Gbps or 10Gbps embedded services processor and four built-in Gigabit Ethernet ports.

Cisco QuantumFlow The forwarding processor chipset, which is on the ESP, for the Cisco ASR 1000 Series Router

Processor

consolidated	A single software image containing multiple sub-packages and a provisioning file. Cisco IOS XE
package	software is released using consolidated packages, and Cisco ASR 1000 Series Routers can be run using
	a consolidated package or individual packages.
CPE	Customer premises equipment
CTS	Cisco Trusted Security. Cisco-defined protocols and procedures for user and device authentication and
	role-based access control (includes packet tagging across network)

D

DBE

DB-25

Data border element. Represents the media-handling portion of the SBC, controlling access of media packets to the network.

AC power supply DB-25 alarm connector—A female DB-25 D-sub connector which enables you to attach an external alarm monitoring facility to the router, thus supporting a telco-style of handling alarm conditions in the router.

DCE		Data communication equipment. Provide clocking to DTE. Console port of UART.
DDR		Double Data Rate—Data transfer method that transfers data on both clock edges.
DES		Data Encryption Standard algorithm
		Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
	GL-2	OL-13208-03