Cisco Systems ASR 1000 Series manual GL-5

J

K

L

LC

LDP

LIPC Location ID

M

Media address

MGCP

MPLS

N

NAT

NAT traversal

NBAR

Glossary

Line card

Label Distribution Protocol

Local IPC between two processes

A location ID is configured on each data border element (DBE). The signaling border element (SBE) may associate endpoints with a particular location ID and then use the location IDs to route calls between different DBEs.

Pool of IP addresses on the DBE for media relay functionality. A pool of addresses is defined for the Global VPN that the DBE is attached to. All vDBEs within the DBE draw media addresses from this pool.

Media Gateway Control Protocol. This is a VoIP signaling protocol, usually used between a dumb device and a clever controller. It is similar in functionality (if not syntax) to H.248. It is defined in RFC 2705.

Multi-Protocol Label Switching

Network Address Translation. This is a program or piece of hardware that converts an IP address from a private address to a public address in real time. It allows multiple users to share a single public IP address.

Detects that the endpoints are behind a NAT device.

Network-based Application Recognition

	Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03		GL-5