Chapter 2 Cisco ASR 1000 Series Routers Components
Cisco ASR 1000 Series Router Power Supplies
Power supply modules with internal fan modules install into the rear of the chassis. These modules contain handles to ease installation and removal. The AC power supply has a front panel mounted switch that powers on and off the power supply. This switch will not disconnect the AC line, but will act only as a standby switch to the power supply. The front panel includes a mechanical guard to prevent the standby switch from being tripped due to accidental contact.
Guide pins located at the rear of these modules help center locate the modules and reduce stress to the midplane and module mounted connectors. Four captive screws (tool operated latches) are provided on the modules face plate (chassis rear) to secure these modules into the chassis.
Cisco ASR 1004 AC Power Supply LEDs and Connector
Figure 2-13 shows the AC power supplies at the rear of the Cisco ASR 1004 Router.The Cisco ASR 1004 Router supports up to two power supplies. The power supply LEDs and connectors on the rear of the chassis are described in Table 2-14.
Figure 2-13 Cisco ASR 1004 Router AC Power Supply
1 |
| 2 |
|
| OUTPUT INPUT FAN | ||
| FAIL | OK | OK |
ALARMS |
|
| |
|
| ||
60V |
|
| |
|
|
| |
| 1A MAX |
|
|
| OUTPUT INPUT FAN | ||
| FAIL | OK | OK |
ALARMS |
|
| |
|
| ||
60V |
|
| |
|
|
| |
| 1A MAX |
|
|
|
|
| 280184 |
5 | 4 | 3 |
|
1 | AC power supply Standby switch (standby | 4 | AC power supply fan |
| symbol is a broken circle with a vertical line |
|
|
| through the top of it) |
|
|
|
|
|
|
2 | AC power supply LEDs | 5 | AC power inlet |
|
|
|
|
3 | 6 | AC power supply handle | |
|
|
|
|
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
|
| |
|
