Cisco Systems ASR 1000 Series manual Cisco ASR 1004 Router Specifications

Appendix A Cisco ASR 1000 Series Routers Specifications

Cisco ASR 1004 Router Specifications

Cisco ASR 1004 Router Specifications

This section lists the specifications for the Cisco ASR 1004 Router.

Table A-8lists the Cisco ASR 1004 Router physical specifications.

Table A-8	Cisco ASR 1004 Router Specifications
Description		Specification
Midplane		Connects the Cisco ASR 1000 Series RP1, ASR 1000 Series ESP, Cisco ASR 1000 Series
		SPA Interface (SIP), SPAs, and power supplies together in the system
Dimensions (H x W x D)		Height = 7 in. (17.8 cm) (4RU rack-mount per EIA RS-310)
		Width = 17.25 in. (43.815 cm) (19 inch rack-mount or optional 23 Telco rack- mount)
		Depth = 22.50 in. (57.15 cm) (including card handles, cable-management brackets and
		power supply handles)
Weight		50 pounds (fully configured)
		22.6796 kg
Nominal operating temperature		• 41° to 104° F
		• 5° to 40° C
Nominal operating humidity		10% to 85%
Storage temperature		• –38° to 150° F
		• –40° to 70° C
Power consumption		•	Maximum DC: 1020W
		•	Maximum AC: 960W
		•	Maximum (Out): 765W

Cisco ASR 1004 Router Memory and Storage Options

Table A-9lists the hardware memory and storage options supported on the Cisco ASR 1004 Router.

Table A-9	Memory and Storage Options for Cisco ASR 1004 Router
Memory Type		Default	Maximum System Support
RP1		2 GB DRAM	4 GBDRAM
eUSB		1 GB (Partitioned: 2x32MB for	For mass storage: hard disk drive 40 GB or solid-state
		NVRAM and the remaining for	drive 32Gb support
		mass storage

Cisco ASR 1004 Router Ethernet RJ-45 Port Pinouts

The Cisco ASR 1004 Router has RJ-45 port for the 10/100/1000 Ethernet connection. The RJ-45 port supports IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with 10BASET, 100BASETX, and 1000BASET specifications.

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide

OL-13208-03 A-5