Chapter 8 Replacing Cisco ASR 1000 Series Routers
Removing and Replacing the Cisco ASR 1000 Series RP1 Internal Hard Drive
Figure 8-1 Cisco ASR 1000 Series Route Processor1 Internal Hard Drive Unit
3
1
1
280150
Step 3 Using the handles on both sides of the module, with two hands gently slide the Cisco ASR 1000 Series RP1 out of the chassis.
Step 4 Place the module on a flat surface free of dust and dirt.
Step 5 Remove the internal hard drive cover:
a.Unscrew the fasteners.
b.Slide the cover off.
c.Lift the cover up from the board.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
|
|
| |
|
|
