Cisco Systems ASR 1000 Series manual 4GB Fecp Dram 1GB Fecp Dram

Chapter 2 Cisco ASR 1000 Series Routers Components

Cisco ASR 1000 Series Embedded Services Processors

Table 2-5		Differences in Cisco ASR1000 Embedded Services Processors
	Feature		Cisco ASR1000-ESP5	Cisco ASR1000-ESP10	Cisco ASR1000-ESP20
	Memory		256MB Cisco QuantumFlow	512MB Cisco QuantumFlow	1GB Cisco QuantumFlow Processor,
			Processor, 10Mb TCAM,	Processor, 10Mb TCAM, and	40Mb TCAM, 256MB packet buffer,
			64MB packet buffer, and	128MB packet buffer, and 2GB	4GB FECP DRAM
			1GB FECP DRAM	FECP DRAM
	Performance		4 Mpps for the combination	8 Mpps forwarding for the	16 Mpps forwarding for the
			of the following	combination of the following	combination of the following
			commonly-used features:	commonly-used features: IPv4	commonly-used features: IPv4
			IPv4 forwarding, IP	forwarding, IP Multicast, ACL,	forwarding, IP Multicast, ACL, QoS,
			Multicast, ACL, QoS,	QoS, Reverse Path Forwarding	Reverse Path Forwarding (RPF), load
			Reverse Path Forwarding	(RPF), load balancing, and	balancing, and Sampled NetFlow
			(RPF), load balancing, and	Sampled NetFlow
			Sampled NetFlow
	Bandwidth		5Gbps of bandwidth	10Gbps of bandwidth	20Gbps of bandwidth
	Security Traffic		1Gbps	3 Gbps	8Gbps
	Performance
	Product		Located in slot 1 and is	Located in:	Located in:
	Compatibility		labeled F0 in the Cisco ASR	• Cisco ASR 1006 Router		• Cisco ASR 1006 Router physical
			1002 Router only
				physical slots 3 and 4 and are			slots 3 and 4 and are labeled F0
				labeled F0 and F1.			and F1.
				• Cisco ASR 1004 Router		• Cisco ASR 1004 Router physical
				physical slot 1 and is labeled			slot 1 and is labeled F0.
				F0.
				• Cisco ASR 1002 Router
					Note The Cisco ASR 1002 Router
				physical slot 1 (top slot) and
				is labeled F0.				does not support the
								Cisco ASR1000-ESP20.

The Cisco ASR 1000 Series Embedded Services Processor (ESP) consists of a front panel label for indicator and control functions. The Cisco ASR 1000 Series Embedded Services Processor model number labeling is located next to the left card module handle. The module also contains card handles to assist in insertion or removal of the module.

Figure 2-5shows the Cisco ASR 1000 Series Embedded Services Processor LEDS on the front panel.

Note The Cisco ASR 1000 Series embedded services processors have the same faceplate and status information except for the name label, such as Cisco ASR1000-ESP20, Cisco ASR1000-ESP10, Cisco ASR1000-ESP10-N, or Cisco ASR1000-ESP5.

	Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03		2-11