Chapter 6 Cisco ASR 1002 Router Overview and Installation
Connecting Power to Cisco ASR 1002 Router
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
This section provides the procedures for connecting
Cisco ASR 1002 Router.
The DC power supply for the Cisco ASR 1006, ASR 1004, and ASR 1002 routers operate at individual specifications. Table
| Table | Cisco ASR 1000 Series Router DC Power Supply System Input Requirements | |||||
|
|
|
|
|
|
|
|
Cisco ASR 1000 |
|
|
|
|
|
|
|
Series Router DC |
|
|
|
|
|
|
|
Power Supply | System Input Rating (Amps) | Circuit Breaker Amps |
| AWG # Wire | |||
|
|
|
|
|
|
|
|
|
|
| Minimum | Maximum | Minimum |
| Maximum |
|
|
|
|
|
|
| |
Cisco ASR 1006 | 40 |
| Always 50 |
| Always AWG #6 wire | ||
|
|
|
|
|
|
|
|
Cisco ASR 1004 | 24 |
| 30 | 40 | 10 |
| 8 |
|
|
|
|
|
|
|
|
Cisco ASR 1002 | 16 |
| 20 | 30 | 12 |
| 10 |
|
|
|
|
|
|
|
|
For example, the Cisco ASR 1002 Router DC power supply, with 16 Amp input rating must use an AWG #12 gauge wire for a 20Amp circuit breaker and an AWG #10 gauge wire for a 30Amp circuit breaker.
Note All Cisco ASR 1000 Series Router AC power supplies require a 20 AMP circuit breaker.
Note Detailed instructions for removing and replacing the Cisco ASR1002 Router AC and DC power supplies are in Removing and Replacing a Cisco ASR 1002 Router Power Supply, page
Read the safety warnings before you begin.
Warning Never install an AC power module and a DC power module in the same chassis. Statement 1050
Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning When installing or replacing the unit, the ground connection must always be made first and disconnected last. Statement 1046
Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
| Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide |
|
