Cisco Systems ASR 1000 Series manual Replacing the Cisco ASR1000-ESP

Chapter 8 Replacing Cisco ASR 1000 Series Routers Field-Replaceable Units

Removing and Replacing the Cisco ASR 1000 Series Embedded Service Processors

Step 2 Using the handles on both sides of the module, with two hands gently slide the Cisco ASR 1000 Series Embedded Services Processor (ESP5, ESP10, ESP20) out of the chassis slot.

Note Handle the Cisco ASR1000-ESP5, Cisco ASR1000-ESP10, or Cisco ASR1000-ESP20 by the carrier edges only; never touch the printed circuit board components or connector pins.

Step 3 Place the Cisco ASR1000-ESP5, Cisco ASR1000-ESP10, or Cisco ASR1000-ESP20 on an antistatic surface with its printed circuit board components facing upward or in a static shielding bag.

You have completed the removal procedure for the Cisco ASR 1000 Series Embedded Services Processor. from a Cisco ASR1000-ESP.

Replacing the Cisco ASR1000-ESP

To replace the Cisco ASR 1000 Series Embedded Services Processor in the Cisco ASR 1000 Series Router, follow this procedure:

Step 1 Attach an ESD-preventive wrist strap between you and an unfinished chassis surface. Step 2 Remove the new Cisco ASR1000-ESP from its static shielding bag.

Step 3 Using both hands, grasp the Cisco ASR1000-ESP by its metal carrier edges and orient the it so that its printed circuit board components are upward.

Caution Handle the Cisco ASR1000-ESP by the carrier edges and handle only; never touch the printed circuit board components or connector pins.

Step 4 Align the left and right edges of the Cisco ASR1000-ESP printed circuit board between the Cisco ASR1000-ESP slot guides.

Step 5 Gently slide the Cisco ASR1000-ESP all the way into its chassis slot until you feel the connectors seat with the router midplane.

Step 6 Seat the Cisco ASR1000-ESP in the router midplane by tightening its captive installation screws with a number 2 Phillips or a 3/16-inch flat-blade screwdriver.

This completes the procedure for replacing the Cisco ASR1000-ESP in a Cisco ASR1000 Series Router.

	Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
8-18	OL-13208-03