Honeywell UDA2182 manual Unit Identification, Option ID Number, Loops default, No default, Inputs

			Configuration
Sub-menu	Parameter	Selection or Range of	Parameter Definition
selection		Setting
	Password	0000 (default) to 9999	Setup configuration, calibration and maintenance
		AAAA to ZZZZ	functions can be password-protected. The
			password can be any number between 1 and
			9999 or letters. (When the password is zero, the
			operator will not be prompted to enter a
			password.)
			Follow the “ General Rules for Editing” to change
			the digits.
	Unit ID	Unit Identification	Read Only
	Option ID*	Option ID Number	= 0 if PID is not available
			= ID Number if PID available
			*See note at end of table
	PID Control*	1 Loop	Enables the PID Control configuration
		2 Loops (default)	Parameters
			*See note at end of table
	Unit Reset	No (default)	Unit Reset initializes all calibration and
		Yes	configuration data to factory default values, with
			the exception of the Factory Temperature
			Calibration correction values
Inputs	Input 1 Type	Read Only	pH/ORP - pH or Oxidation Reduction Potential
	Input 2 Type		pH Preamp – pH with preamplifier
			Conductivity (Dual if both inputs same)
			DO ppm - Dissolved Oxygen
			DO ppb - Dissolved Oxygen

January 2009 UDA2182 Universal Dual Analyzer Product Manual 109