Honeywell manual Specifications, UDA2182 Universal Dual Analyzer

Specifications

		2 Specifications
2.1 Specifications
	UDA2182 Universal Dual Analyzer
Display	Graphical LCD with white LED Backlight
	Viewing Area: 66.8 mm (W) X 35.5 mm (H)
	Dot Pixels: 128 (W) X 64 (H)
Display Ranges	pH:
	0-14 pH
	Temperature: -10 to 110°C (14 to 230°F)
	ORP:
	-1600 to +1600 mV
	Conductivity:
	0.01 Cell:	0-2 uS/cm displayable to 200 uS/cm; 0-0.2 mS/cm;
		0-2,000 ppb TDS; 0-200 ppm TDS
	0.1 Cell:	0-20 uS/cm displayable to 2000 uS/cm; 0-2 mS/cm,
		0-2,000 ppb TDS; 0-2,000 ppm TDS,
	1.0 Cell:	0-200 uS/cm displayable to 20,000 uS/cm; 0-20 mS/cm;
		0-200 ppm TDS; 0-20 ppt TDS
	10 Cell:	0-2,000 uS/cm displayable to 99999 uS/cm; 0-200 mS/cm;
		0-2,000 ppm TDS; 0-200 ppt TDS
	25 Cell:	0-20,000 uS/cm displayable to 99999 uS/cm; 0-500 mS/cm;
		0-10% Concentration displayable to 20%
	50 Cell:	0-20,000 uS/cm displayable to 99999 uS/cm; 0-1,000 mS/cm;
		0-20% Concentration
	Temperature: 0 to + 140°C (32 to 284°F)
	Dissolved Oxygen:
	0 - 20 ppm
	0 –200 ppb, displayable to 20000 ppb
	0 – 100% saturation, displayable to 200% saturation
	Temperature: 2 – 60°C (35.6 – 104°F), must not freeze
Keypad	10 Button Membrane Switch w/Directional Functionality
	UV/Solvent/Abrasion Resistant
Case Material	GE Valox® 357 (un-reinforced thermoplastic polyester)
Performances (Under	Accuracy: 0.5% of reading
reference operating	Output Accuracy: +/- 0.01 mA
conditions)	Drift: Negligible
	Repeatability: 0.05%
	Temperature Accuracy:
	pH and Conductivity Thermistor: +/- 0.1°C from –10 to 100° C, +/- 1.0° C from 101° to 140° C
	pH 1000 ohm RTD: +/- 0.4° C
	D.O. Thermistor: +/- 0.1° C from 0 to 60° C
	Reference Operating Conditions:		25 +/- 1° C; 10-40% RH; 120 or 240 Vac
Operating Conditions	Ambient Temperature
	Operating: 0 to 60°C (32 to 140°F)
	Storage: -30 to 70°C (-22 to 158°F)
	RH: 5 to 90% max. Non-condensing up to 40°C (104°F). For higher temperatures the RH specification
	is derated to maintain constant moisture content
	Vibration:
	5-15 Hz disp		8 mm pk to pk
	15-200 Hz accel		2 G
Standard Analog Output	Two 0-20 mAdc or 4-20 mAdc, 750 ohms max., isolated from inputs, ground, and each other,
	Independently field-assignable to any parameters and ranges.
	Proportional to user-set output range(s) of selected parameter(s),
Optional Analog Output	One 0-20 mAdc or 4-20 mAdc, 750 ohms max., isolated from inputs, ground, and each other.
	Independently field-assignable to any parameters and ranges

January 2009 UDA2182 Universal Dual Analyzer Product Manual 5