Honeywell UDA2182 manual CE Conformity Europe, Declaration of Conformity

		Specifications
		UDA2182 Universal Dual Analyzer
	Ethernet TCP/IP	Type: 10 or 100 BaseT; auto-speed and auto-polarity sensing
	Communications Interface	Length of Link: 330 ft. (100 m) maximum. Use Shielded twisted-pair, Category 5 (STP CAT5) Ethernet
	(Optional)	cable.
		Link Characteristics: Four-wire plus shield, single drop, five hops maximum
		IP Address: IP Address is 192.168.1.254 as shipped from the factory
		Recommended network configuration: Use Switch rather than Hub in order to maximize UDA Ethernet
		performance
		Configuration: Ethernet parameters are configured via the front-panel or web pages.
		Modbus TCP/IP: Five simultaneous socket connections provide monitoring of inputs outputs, statuses,
		alarms, and variables. Provides writing of variables for remotely modifying parameter settings.
		Modbus TCP/IP Data Format: IEEE floating point and 32-bit integer. Word swap configurable.
		Web server: multiple client support
		Multi-language Web pages: monitoring inputs, outputs, statuses, alarms, and events
		Multi-language Email: Alarm notification to eight email addresses. These must be configured using
		web pages signed in as the administrator.
		DHCP: ( Dynamic Host Configuration Protocol) selectable via web page or front-panel
	Safety Compliance	UL/CSA General Purpose
		FM/CSA Approval for Class I, Div 2; Groups A, B, C and D. T4, Ta =60°C
	CE Compliance	CE Conformity (Europe): CE Mark on all models signifies compliance to EMC Directive 84/336/EEC
		and LVD Directive 73/23/EEC.
		EMC Classification: Group 1, Class A, ISM Equipment
		Method of Assessment: Technical File (EN61010-1; EN 61326)
		Declaration of Conformity: 51453667
	Case Dimensions	156 mm X 156 mm X 150 mm (6.14” X 6.14” X 5.91”)
		Panel cutout: 138.5 mm X 138.5 mm (5.45” X 5.45”)
		Panel thickness: 1.52 mm (0.06”) min, 9.5 mm (0.38”) max
	Enclosure Rating	CSA Type 4X (NEMA 4X) rated enclosure
		FM Class 1, Div 2
	Installation Ratings	Installation Category (Overvoltage Category): Category II
		Pollution Degree: 2
		Altitude: 2000 m
Weight		Approx 3 lbs (6.6kg)
	Mounting	Panel mounting-hardware supplied.
		Optional Wall and 1” to 2” pipe mounting. Select option appropriate in Model Number.

2.2 CE Conformity (Europe)

This product is in conformity with the protection requirements of the following European Council Directives: 73/23/EEC, the Low Voltage Directive, and 89/336/EEC, the EMC Directive. Conformity of this product with any other “CE Mark” Directive(s) shall not be assumed.

Product Classification: Class I: Permanently connected, panel-mounted Industrial Control Equipment with protective earthing (grounding) (EN61010-1).

Enclosure Rating: The front panel of the analyzer is rated at NEMA4X when properly installed.

Installation Category (Overvoltage Category): Category II (EN61010-1)

Pollution Degree: Pollution Degree 2: Normally non-conductive pollution with occasional conductivity caused by condensation. (Ref. IEC 664-1)

EMC Classification: Group 1, Class A, ISM Equipment (EN61326, emissions), Industrial Equipment (EN61326, immunity)

Method of EMC Assessment: Technical File (TF)

January 2009 UDA2182 Universal Dual Analyzer Product Manual 7