Honeywell UDA2182 manual Selecting the Pharma Test on Display

				Operating the Analyzer
	Table 5-6 Selecting the Pharma Test on Display
Press		Action
Enter	to access the Pharma Op Panel. A pop-up dialog box will appear:
		Pharma Test	Stage 1
		PCT Warn	80.00
	Various parameters appear for each stage:
	Parameter	Values		Visibility
	Pharma Test Selection	Stage 1		Always on
		Stage 2
		Stage 3
		Pure H2O (PhEur only)
	Pct Warning (% at	0 to 100 %		Stage 1 only
	which the test warn
	occurs)
	Test µS/cm	0 to 10 (default=10)		Stage 2 only
	Test pH	0 to 14 (default=0)		Stage 3 only
Enter	to access the Stage selection.
	to change the selection to
	Stage 1, Stage 2, Stage 3 or Pure H2O (PhEur only).
Enter	to make the selection permanent.
	to select Pct Warning (Stage 1 only)
Enter	to access the Pct Warning Value and allow editing
	to select a value
Enter	to make the selection permanent.
	to select Test µS/cm (After Stage 2 is selected)
Enter	to access the Test µS/cm Value
	to select a value
Enter	to make the selection permanent.
	to select Test pH (After Stage 3 is selected)
Enter	to access the Test pH Value
	to select a value
Enter	to make the selection permanent.

January 2009 UDA2182 Universal Dual Analyzer Product Manual 35