Honeywell UDA2182 manual Input Status, Output, Levels, Relay States, Monitor

Operating the Analyzer

Status	Parameter	Status	Status Definition
Display		(Read Only)
Logic Status	Logic 1	ON	Read Only
	Logic 2	Off
	Logic 3
	Logic 4
Input Status	In 1 Fault	OK or Fail	Read Only – depends on the Input selected
	In 2 Fault	OK or Fail
	Digital In 1	On or Off
	Digital In 2	On or Off
Output	Output 1 mA	Output Level in	Read Only – depends on the Output type selected at
Levels	Output 2 mA	Milliamps	setup “Outputs”, “Output n”, “Source”:
	Output 3 mA		None
			Input 1 PV
			Input 2 PV
			Input 1 Tmp
			Input 2 Tmp
			Pharma Out 1
			Pharma Out 2
			Math 1
			Math 2
			Math 3
			Math 4
			Func Gen 1
			Func Gen 2
			Switch 1
			Switch 2
			Sum
			Difference
			Ratio
			%Passage
			%Rejection
			PID 1
			PID 2
			See Table 6-6 for configuration.
Relay States	Relay 1	State of the	Read Only – state depends on the Output source
	Relay 2	relay	selected at Relay Setup Group, parameter “Relay
	Relay 3		Types”:
	Relay 4		Digital Output (On or Off)
			Time Proportional (Value)
			Frequency Proportional Output (Value)
			On/Off (On or Off)
			Pulse Out (On or Off)
			See Table 6-7 for configuration.
Monitor	Monitor 1	ON	Read Only – State depends on the output of the
Status	Monitor 2	Off	analog monitor blocks.
	Monitor 3
	Monitor 4

42 UDA2182 Universal Dual Analyzer Product Manual January 2009