Intel 815 manual SolPat Rsvd Mono

Intel® 815 Chipset: Graphics Controller PRM, Rev 1.0

R

12.3.2.BR01—Setup BLT Raster OP, Control, and Destination Offset

Memory Offset Address:	40004h
Default:	0000 xxxx
Attributes:	RO; DWord accessible

BR01 contains the contents of the last Setup instruction DWord 1. It is identical to the BLT Raster OP, Control, and Destination Offset definition, but it is used with the following instructions: PIXEL_BLT, SCANLINE_BLT, and TEXT_BLT.

31	30	29		28	27	26	25	24	23	16
SolPat	Rsvd		Mono	Mono	Src	Dyn		Color
			Src	Pat	Sel	Color	Depth			Raster Operation
			Trans	Trans	Mode	Depth
						Enable
15	14	13								0
Rsvd						Destination Pitch (Offset)
	Bit						Descriptions
	31		Solid Pattern Select. This bit applies only when the pattern data is monochrome. This bit determines
			whether or not the BLT Engine actually performs read operations from the frame buffer in order to load
			the pattern data. Use of this feature to prevent these read operations can increase BLT Engine
			performance, if use of the pattern data is indeed not necessary. The BLT Engine is configured to
			accept either monochrome or color pattern data via the opcode field.
			0 = This causes normal operation with regard to the use of the pattern data. The BLT Engine
			proceeds with the process of reading the pattern data, and the pattern data is used as the pattern
			operand for all bit-wise operations.
			1 = The BLT Engine forgoes the process of reading the pattern data, the presumption is made that all
			of the bits of the pattern data are set to 0, and the pattern operand for all bit-wise operations is
			forced to the background color specified in the Color Expansion Background Color Register.
	30		Reserved. Must be Zero.
	29		Monochrome Source Transparency Mode. This bit applies only when the source data is in
			monochrome. This bit determines whether or not the byte(s) at the destination corresponding to the
			pixel to which a given bit of the source data also corresponds will actually be written if that source data
			bit has the value of 0. This feature can make it possible to use the source as a transparency mask.
			The BLT Engine is configured to accepted either monochrome or color source data via the opcode
			field.
			0 = This causes normal operation with regard to the use of the source data. Wherever a bit in the
			source data has the value of 0, the color specified in the background color register is used as the
			source operand in the bit-wise operation for the pixel corresponding to the source data bit, and
			the bytes at the destination corresponding to that pixel are written with the result.
			1 = Wher a bit in the source data has the value of 0, the byte(s) at the destination corresponding to
			the pixel to which the source data bit also corresponds are simply not written, and the data at
			those byte(s) at the destination are allowed to remain unchanged.

186