Bypassing effect automation
For
button (
) on the Audio
Removing
1.Click the Track FX button (
). The Audio
2.
).
3.Click the Close button (
) to close the Audio
Tip: To remove all 
) and choose Delete All.
Removing or bypassing all effects on tracks
You can clear a track of all effects by 
) and choosing Delete All from the shortcut menu.
You can bypass all of a track’s effects without removing them by 
) and choosing Bypass All from the shortcut menu. To apply them again, 
) and choose Enable All from the shortcut menu.
Routing tracks to an assignable effects chain
Routing tracks to an assignable effects chain allows you to assign multiple tracks to a
In order to route tracks to an assignable effects chain, you must first add an assignable effects chain to your project. For more information, see The Mixing Console toolbar on page 151.
1.Click the label on the multipurpose slider label and choose the desired assignable effects chain from the submenu. The label changes to reflect the name of the assignable effects.
Tip: If you can’t see the multipurpose slider, drag the bottom edge of the track header to increase its height.
2.Drag the fader to adjust the level of the track sent to the assignable effects chain.
If you set the Dry Out faders in your effects chain to
110 CHAPTER 7