Item | Description |
7 Fader | Adjusts the track or bus level (unless the Flip button is selected). |
| When the Automation button is selected, the fader adjusts the automation envelope if the track is in |
| Automation Write (Touch) or Automation Write (Latch) mode. |
| The fader can also adjust settings for the following items when you select other buttons in the Channel section. |
| • Audio track panning: Adjusts audio track panning when the Pan and Flip buttons are selected. |
| • Bus send levels: Adjusts bus send levels when the Sends and Flip buttons are selected. |
| The fader is touch sensitive, so if you're recording automation parameters, recording will begin when you touch |
| the fader and stop when you release it. The current setting is displayed in the Mackie Control display. |
Footswitches (not shown)
The Mackie Control has two switched inputs (labeled User Switch A and User Switch B) that you can use to connect footswitches.
By default, footswitch A toggles playback, and footswitch B starts and stops recording.
You can customize the footswitches in the Configure Mackie Control dialog.
Control buttons
The buttons in the Control section determine the operation of the
the
1
2
3
4
5
6
Item | Description | |
1 | Output | Press the Output button to set the output device for each track or bus. Turn the |
|
| choose an output device and press the |
2 | Input | Press to set the recording input device for each track. Turn the |
|
| device and press the |
3 | Pan | Press to adjust track panning using the |
|
| In 5.1 surround projects, pressing the Pan button toggles |
|
| |
4 | Sends | Press to adjust bus and assignable effects send levels. Press the Sends button to scroll through the available |
|
| busses and assignable effects chains, and then turn the |
274 APPENDIX B