Markers buttons

The Markers buttons control additional track and channel settings.

1

2

3

4

5

6

7

8

Item Description

1Marker 1/9 Automation Mode

2Marker 2/10 Pan Mode

3 Marker 3

4 Marker 4

Input

Monitor

5 Marker 5

Pre/Post

6 Marker 6

Default

Press to place the cursor at marker 1, or hold Shift and press to place the cursor at marker 9.

When the Settings button is selected, hold the button and turn the V-Pot to change the automation recording mode for each track and bus track.

Press to place the cursor at marker 2, or hold Shift and press to place the cursor at marker 10.

When the Settings button is selected, hold the button and turn the V-Pot to change the current panning mode.

Press to place the cursor at marker 3.

Press to place the cursor at marker 4.

When the Settings button is selected, hold the button and turn the V-Pot to change record input monitoring settings when you're using an ASIO audio device.

Press to place the cursor at marker 5.

When the Pan button is selected, press the Settings button and then hold F5 while pressing the V-Pot to change the bus or assignable effects output fader to Pre FX or Post FX.

When the Sends button is selected, press the Settings button and hold F5 while pressing the V-Pot to change a track's bus or assignable effects send level to Pre Volume or Post Volume. Press the Sends button to scroll through the available bus and effects sends.

Press to place the cursor at marker 6.

Press the Settings button and hold F6 while pressing the V-Pot on a channel to return the channel's settings to the track defaults.

7Marker 7 Press to place the cursor at marker 7.

8 Marker 8 Press to place the cursor at marker 8.

Add New buttons

The Add New buttons add busses or tracks to your project.

1

2

Item

Description

1

Track

Press to add a new audio track.

2

Bus

Press to add an audio bus to your project.

APPENDIX B 277