4.Double-click the Def box and type a new value to change the default setting for a controller. This value is used when you reset envelope points.

5.Click the down arrow in the Curve Type box to set the default fade curve for each controller's automation envelope. The new curve type will be applied to all segments on the envelope. You can right-click a segment and choose a new fade curve to override the default curve type.

6.Click the Save button if you want to save the current settings as a mapping file, or click Load to browse to a mapping file that will replace the current settings.

Note: You can also select controllers by doing either of the following:

•Double-click the MIDI track icon to open Track Properties dialog. On the Output Setting tab, choose Controllers from the drop-down menu.

•Click the Program button , choose Select Program Change.

Tip: You can MIDI merge recording to record MIDI controller values from a MIDI device. For more information, see Using MIDI merge recording on page 192.

Setting the track voice

You can set the voice used to play the entire track, or you can add keyframes to add program changes.

1.Right-click the track header, choose Insert/Remove Envelopes, and then choose Configure Controllers from the menu. The Track Properties dialog is displayed.

2.On the Output Settings tab, choose Voices from the drop down menu.

3.Choose the voice you want to use.

Note: You can also set the track voice by doing the following:

•Double-click the MIDI track icon to open Track Properties dialog. On the Output Setting tab, choose Voices from the drop-down menu.

•Click the Program button , choose Select Program Change, and then choose Voices from the drop-down menu.

Changing the track voice

1.Click the Program button .

2.Choose a program from the menu, or choose Select Program Change to display the Output Settings tab in the Track Properties window, where you can select a patch.

WORKING WITH MIDI 203