Item | Description |
|
|
| |
Quick fade edges to | When you add an offset to an event so that it does not end on a loop point, you can introduce an audible click at the edges | |
prevent clicks | of the event. Select the Quick fade edges to prevent clicks check box, and a quick | |
| event edges. |
|
| To adjust a quick fade, zoom into the event and hover over the | |
| is displayed as | . Drag the edge of the fade to adjust its duration. For more information, see Setting an event’s |
| ||
|
| |
Reverse | Select the Reverse check box to reverse the event’s audio and peak data. An arrow appears on the event in the timeline to | |
| indicate that it has been reversed. | |
|
|
|
Muting and locking events
Hold Ctrl or Shift while clicking to select multiple events.
Muting events
Muting an event excludes it from playback while preserving its position on the timeline.
1.Select the events you want to mute.
2.
Muted events are dimmed on the timeline.
Muted event
Locking events
Locking an event prevents it from being edited on the timeline.
Notes:
•Locked events cannot be dragged on the timeline.
•When adding events to the timeline, you cannot draw or paint past a locked event.
•Erasing in the timeline will not erase a locked event.
•Event envelopes cannot be modified for locked events.
•Ripple edits and automatic crossfades will not be applied to locked events.
1.Select the events you want to lock.
2.
Using event envelopes
You can use envelopes on individual events. Envelopes give you the ability to control each event’s
These envelopes are different than track envelopes because they affect only the event whereas track envelopes can affect multiple events on the track. For more information, see Using track automation envelopes on page 112.
The event’s volume level and fade curves are represented by a line on the event.
EDITING EVENTS 65