Mitsumi electronic 55K, FR-F520-0.75K Advanced PID control Pr to Pr NA, EC versions only

PARAMETERS

4.2.54 Advanced PID control (Pr. 500 to Pr. 516) (NA, EC versions only)

Pr. 500	"Auxiliary motor operation selection"		Related parameters
Pr. 501	"Motor switch-over selection"	Pr. 128 to Pr.134 (PID control)
		Pr. 180 to Pr. 186
Pr. 502	"MC switching interlock time"		(input terminal assignment)
		Pr. 190 to Pr. 195
Pr. 503	"Start waiting time"		(output terminal assignment)

Pr. 504 "Auxiliary motor connection-time deceleration time"

Pr. 505 "Auxiliary motor disconnection-time acceleration time"

Pr. 506 "Output stop detection time"

Pr. 507 "Output stop detection level"

Pr. 508 "Output stop cancel process value level"

Pr. 509 "Auxiliary motor 1 starting frequency"

Pr. 510 "Auxiliary motor 2 starting frequency"

Pr. 511 "Auxiliary motor 3 starting frequency"

Pr. 512 "Auxiliary motor 1 stopping frequency"

Pr. 513 "Auxiliary motor 2 stopping frequency"

Pr. 514 "Auxiliary motor 3 stopping frequency"

Pr. 515 "Auxiliary motor start delay frequency"

Pr. 516 "Auxiliary motor stop delay frequency"

With the advanced PID control functions, you can control pumps/fans using several motors (maximum of 4
motors).	4

<Operation outline>

#Set the number of commercial power supply operation motors in Pr. 500 "auxiliary motor operation selection", and the motor switch-over method in Pr. 501 "motor switch-over selection".

Pr. Number	Name	Setting Range	Setting Increments	Factory Setting	Description
					Set the number of auxiliary
500	Auxiliary motor	0 to 3	1	0	motors to be run. (1 to 3
	operation selection				motors)
					0: Auxiliary motors are not run.
	Motor switch-over				0: Basic Method
501		0 to 2	1	0	1: Alternative Method
	selection
					2: Direct Method

145