Mitsumi electronic FR-F520-0.75K, 55K instruction manual F4 fourth frequency voltage

Parameter List

PARAMETERS

				Minimum	Factory	Refer	Cust-
Func-	Parameter				Setting		omer
		Name	Setting Range	Setting		To
tion	Number				〈EC		Set-
				Increments		Page:
					Version〉		ting
flexiblepoint-5 V/F characteristics	107	V/F4 (fourth frequency voltage)	0 to 1000V	0.1V	0	108
	108	V/F5 (fifth frequency)	0 to 120Hz, 9999	0.01Hz	9999	108
	109	V/F5 (fifth frequency voltage)	0 to 1000V	0.1V	0	108
functions	117	Station number	0 to 31	1	0	109
	119	Stop bit length/data length		1	1	109
	118	Communication speed	48, 96, 192	1	192	109
			0, 1 (data length 8)
Communication			10, 11 (data length 7)
	120	Parity check presence/absence	0, 1, 2	1	2	109
	121	Number of communication retries	0 to 10, 9999	1	1	109
	122	Communication check time interval	0, 0.1 to 999.8 s, 9999	0.1 s	0 〈 9999〉	109
	123	Waiting time setting	0 to 150ms, 9999	1ms	9999	109
	124	CR • LF presence/absence selection	0,1,2	1	1	109
	128	PID action selection	10, 11, 20, 21		10	120
			(30, 31 Note 5)
control	129	PID proportional band	0.1 to 1000%, 9999	0.1%	100%	120
	130	PID integral time	0.1 to 3600 s, 9999	0.1 s	1 s	120
PID	131	Upper limit	0 to 100%, 9999	0.1%	9999	120
	132	Lower limit	0 to 100%, 9999	0.1%	9999	120
	133	PID action set point for PU operation	0 to 100%	0.01%	0%	120
	134	PID differential time	0.01 to 10.00 s, 9999	0.01 s	9999	120
supplypowerCommercial- over-switchinverter	139	Commercial power supply-inverter	0 to 60.00Hz, 9999	0.01Hz	9999	127
	135	switch-over sequence output terminal	0, 1	1	0	127
		selection
	136	MC switch-over interlock time	0 to 100.0 s	0.1 s	1.0 s	127
	137	Start waiting time	0 to 100.0 s	0.1 s	0.5 s	127
		Commercial power supply-inverter
	138	switch-over selection at alarm	0, 1	1	0	127
		occurrence
		Automatic inverter-commercial power
		supply switch-over frequency
	140	Backlash acceleration stopping	0 to 120Hz	0.01Hz	1.00Hz	79
		frequency (Note 2)
Backlash	142	Backlash acceleration stopping time	0 to 120Hz	0.01Hz	1.00Hz	79
	141	(Note 2)	0 to 360 s	0.1 s	0.5 s	79
		Backlash deceleration stopping
		frequency (Note 2)
	143	Backlash deceleration stopping time	0 to 360 s	0.1 s	0.5 s	79
		(Note 2)
Display	144	Speed setting switch-over	0, 2, 4, 6, 8, 10, 102,	1	4	82
			104, 106, 108, 110
functions	145	Parameter for option (FR-PU04)
Additional	148	Stall prevention operation level at 0V	0 to 150%	0.1%	120%	77
		input
	149	Stall prevention operation level at 10V	0 to 150%	0.1%	150%	77
		input

62