Mitsumi electronic FR-F520-0.75K, 55K instruction manual Parameter List, Parameter list

Parameter List

4.1 Parameter List

PARAMETERS

4.1.1 Parameter list

All parameters available when the Pr. 160 "user group read selection" value is "0" are indicated below. The parameters available when the Pr. 160 value is "9999" (Simple mode parameter) are marked in the Parameter Number column with a circle ($).

					Minimum	Factory	Refer	Cust-
Func-	Parameter					Setting		omer
			Name	Setting Range	Setting		To
tion	Number					〈EC		Set-
					Increments		Page:
						Version〉		ting
						6%/4%/3%
	$	0	Torque boost	0 to 30%	0.1%	/2%	66
						(Note 4)
	$	1	Maximum frequency	0 to 120Hz	0.01Hz	120Hz	67
	$	2	Minimum frequency	0 to 120Hz	0.01Hz	0Hz	67
functions	$	3	Base frequency	0 to 120Hz	0.01Hz	60Hz	68
						〈 50Hz〉
	$	4	Multi-speed setting (high speed)	0 to 120Hz	0.01Hz	60Hz	69
	$	5	Multi-speed setting (middle speed)	0 to 120Hz	0.01Hz	30Hz	69
Basic	$	6	Multi-speed setting (low speed)	0 to 120Hz	0.01Hz	10Hz	69
	$	7	Acceleration time	0 to 3600 s/	0.1 s/	5 s/15 s	70
				0 to 360 s	0.01 s	(Note 1)
	$	8	Deceleration time	0 to 3600 s/	0.1 s/	10 s/30 s	70
				0 to 360 s	0.01 s	(Note 1)
						Rated
	$	9	Electronic thermal O/L relay	0 to 500A	0.01A	output	71
						current
	$	10	DC injection brake operation frequency	0 to 120Hz, 9999	0.01Hz	3Hz	72
	$	11	DC injection brake operation time	0 to 10 s, 8888	0.1 s	0.5 s	72
	$	12	DC injection brake voltage	0 to 30%	0.1%	4%/2%	72
						(Note 1)
	$	13	Starting frequency	0 to 60Hz	0.01Hz	0.5Hz	73
	$	14	Load pattern selection	0, 1	1	1	74
		15	Jog frequency	0 to 120Hz	0.01Hz	5Hz	75
		16	Jog acceleration/deceleration time	0 to 3600 s/	0.1 s/	0.5 s	75
				0 to 360 s	0.01 s
		17	MRS input selection	0,2	1	0	76
	$	19	Base frequency voltage	0 to 1000V, 8888, 9999	0.1V	9999	68
						〈 8888〉
		20	Acceleration/deceleration reference	1 to 120Hz	0.01Hz	60Hz	70
functions			frequency			〈 50Hz〉
		21	Acceleration/deceleration time	0,1	1	0	70
			increments
		22	Stall prevention operation level	0 to 150%, 9999	0.1%	120%	77
operation
		23	Stall prevention operation level	0 to 200%, 9999	0.1%	9999	77
			compensation factor at double speed
		24	Multi-speed setting (speed 4)	0 to 120Hz, 9999	0.01Hz	9999	69
Standard		25	Multi-speed setting (speed 5)	0 to 120Hz, 9999	0.01Hz	9999	69
		26	Multi-speed setting (speed 6)	0 to 120Hz, 9999	0.01Hz	9999	69
		27	Multi-speed setting (speed 7)	0 to 120Hz, 9999	0.01Hz	9999	69
		28	Multi-speed input compensation	0, 1	1	0	78
		29	Acceleration/deceleration pattern	0, 1, 2, 3	1	0	79
		30	Regenerative function selection	0, 2	1	0	80
		31	Frequency jump 1A	0 to 120Hz, 9999	0.01Hz	9999	81
		32	Frequency jump 1B	0 to 120Hz, 9999	0.01Hz	9999	81
		33	Frequency jump 2A	0 to 120Hz, 9999	0.01Hz	9999	81
		34	Frequency jump 2B	0 to 120Hz, 9999	0.01Hz	9999	81
		35	Frequency jump 3A	0 to 120Hz, 9999	0.01Hz	9999	81
		36	Frequency jump 3B	0 to 120Hz, 9999	0.01Hz	9999	81
		37	Speed display	0,1 to 9998	1	0	82
		38	Automatic torque boost	0 to 200	0.1%	0	83
		39	Automatic torque boost operation	0 to 500	0.01A	0	83
			starting current

60