Mitsumi electronic FR-F520-0.75K To 90 to Current setting of gain frequency, ⋅ 9 times, ⋅ 3 times

PARAMETERS

(3)Read Pr. 903 and show the current setting of the gain frequency. (Pr. 902, Pr. 904 and Pr. 905 can also be adjusted similarly.)

#Parameter setting mode

Using the MODE key, choose the "parameter setting mode" as in (2)-1).

FR-DU04	CONTROL PANEL
		Hz
		A
		V
MON	EXT	PU
	REV	FWD
	SET
Most significant			Middle digit	Least significant
digit flickers.			flickers.	digit flickers.

SET

⋅9 times

SET

⋅3 times

SET

0 to 90 to 9

Current setting of gain frequency

FR-DU04CONTROL PANEL

Hz

A

V

MON EXT PU

REV FWD

(4)Set a gain frequency in Pr. 903 and show the analog voltage A/D value across terminals 2-5 in %. (when the frequency is set to 80Hz)

Current setting of			#Changing the gain
gain frequency			frequency
FR-DU04	CONTROL PANEL		FR-DU04	CONTROL PANEL
		Hz			Hz
		A			A
		V			V
MON	EXT	PU	MON	EXT	PU
	REV	FWD		REV	FWD

Press to change the set frequency.

Press for 1.5 s

SET

#Analog voltage A/D value (%)

across terminals 2-5

FR-DU04	CONTROL PANEL
	Hz
	A
	V

MON EXT PU

REV FWD

In any of the methods in (5)-1) to (5)-3) on the following page, continue the setting until the analog voltage A/D value flickers. If you end the setting here, the gain frequency change will not be reflected.

160