Mitsumi electronic 55K, FR-F520-0.75K instruction manual Alarm

			SPECIFICATIONS
			Selection can be made from output frequency, motor current (steady or peak value), output
		Operating	voltage, frequency setting, running speed, overload, converter output voltage (steady or peak
	PU (FR-DU04	status	value), electronic overcurrent protection load factor, input power, output power, load meter,
	/FR-PU04)		total energization time, actual operation time, total power and motor load factor.
Display		Alarm	Alarm definition is displayed when protective function is activated. 8 alarm definitions are stored.
		definition	(Four alarm definitions are only displayed on the operation panel.)
	Additional	Operating	Input terminal signal states, output terminal signal states, option fitting status, terminal
		status	assignment status
	display on
		Alarm	Output voltage/current/frequency/cumulative ON time immediately before activation of
	parameter unit
		definition	protective function
	(FR-PU04)
		Interactive
	only		Operation guide and troubleshooting by help function
		guidance
			Overcurrent shut-off (during acceleration, deceleration, constant speed), regenerative
			overvoltage shut-off, undervoltage, instantaneous power failure, overload shut-off (electronic
Protective/alarm functions			overcurrent protection), ground fault current, output short circuit, main circuit device overheat,
			stall prevention, overload alarm, fin overheat, fan fault, option fault, parameter error, PU
			disconnection, retry count exceeded, output phase failure, CPU error, 24VDC power output
			short circuit, operation panel power supply short circuit
	Ambient temperature		-10°C to +50° C (14° F to 122° F) (non-freezing)
			(-10°C to +40° C (14° F to 104° F) with FR-A5CV""attachment)
Environment	Ambient humidity		90%RH or less (non-condensing)
	Storage temperature		-20°C to +65° C (-4°F to +149° F)
	(Note 2)
	Ambience		Indoors. (No corrosive and flammable gases, oil mist, dust and dirt.)
			Maximum 1000m (3280.80feet) above sea level for standard operation.
	Altitude, vibration		After that derate by 3% for every extra 500m (1640.40feet) up to 2500m (8202.00feet) (91%).
			5.9 m/s2 or less (conforming to JIS C 0040)

Note: 1. Jog operation may also be performed from the operation panel or parameter unit. 2. Temperature applicable for a short period in transit, etc.

6

187