Mitsumi electronic 55K, FR-F520-0.75K #Parameter setting mode, Least significant, #Setting change

PARAMETERS

2)Set "1" (PU operation mode) in Pr. 79 "operation mode selection".

Example: To change the external operation mode (Pr. 79=2) to the PU operation mode (Pr. 79=1)

Using the MODE key,

choose the "parameter

setting mode" as in 1).

#Parameter setting mode				Most significant				Least significant
FR-DU04
	CONTROL PANEL			digit flickers		Middle digit flickers		digit flickers
		Hz
		A	SET		SET
		V
MON	EXT	PU
	REV	FWD
							⋅ 7 times		⋅ 9 times
							SET
							0 to 9		0 to 9

#Current setting #Setting change

SET

Press for

1.5 s

SET

#Setting write

Flicker

If appears, make sure that the forward rotation (STF) or reverse rotation (STR) signal connected to the control terminal is not on.

If it is on, turn it off.

"1" (PU operation mode) has been set in Pr. 79.

If appears, you did not press the SET key for 1.5 seconds when writing the setting. Restart the procedure from the beginning.

Press the key once, press the SET key, and restart the setting from the begining.

4

159