Mitsumi electronic FR-F520-0.75K, 55K instruction manual Name Application

Simple mode parameter

		OPERATION/CONTROL
Parameter	Name	Application
Number
60	Intelligent mode selection	Used to cause the inverter to automatically set the appropriate parameters and
		perform operation.
65	Retry selection	Used to select the alarm whose occurrence will cause the inverter to reset and
		retry automatically.
66	Stall prevention operation reduction
	starting frequency
67	Number of retries at alarm	Used to set the number of retries to be made when an alarm occurs.
	occurrence
68	Retry waiting time	Used to set the number of retries and the waiting time.
69	Retry count display erasure
71	Applied motor	Used to set the thermal characteristic of the electronic overcurrent protection
		according to the motor used.
72	PWM frequency selection	Used to change the motor tone.
73	0-5V/0-10V selection	When using the voltage-input signal to perform operation, set the specifications of
		the frequency setting signal input to across terminals 2-5.
74	Filter time constant	Used to set the input section built-in filter constant of an external voltage or
		current frequency setting signal.
75	Reset selection/disconnected PU	Used to choose the reset selection, disconnected PU detection and PU stop
	detection/PU stop selection	selection functions.
76	Alarm code output selection	Used to output a 4-bit digital signal from the open collector output terminals as the
		definition of an alarm that has occurred.
77	Parameter write disable selection	Used to enable or disable the write of various parameters to prevent the
		parameters from being rewritten by accidental operation.
78	Reverse rotation prevention selection	Used to prevent reverse operation trouble due to the false input of the start signal.
79	Operation mode selection	Use to choose the operation mode of the inverter.
160	User group read selection	Used to read the values of the basic parameters or all parameters.
180	RL terminal function selection
181	RM terminal function selection
182	RH terminal function selection
183	RT terminal function selection	Used to choose and assign the functions of the input terminals.
184	AU terminal function selection
185	JOG terminal function selection
186	CS terminal function selection
190	RUN terminal function selection
191	SU terminal function selection
192	IPF terminal function selection	Used to choose and assign the functions of the output terminals.
193	OL terminal function selection
194	FU terminal function selection
195	A, B, C terminal function selection
240	Soft-PWM setting	Used to change the motor tone.
244	Cooling fan operation selection	Used to control the operation of the cooling fan incorporated in the inverter.
900	FM terminal calibration	Used to calibrate the meters connected to terminals FM-SD and AM-5.
901	AM terminal calibration
902	Frequency setting voltage bias
903	Frequency setting voltage gain	Used to set the magnitude (slope) of the output frequency as desired relative to
904	Frequency setting current bias	the frequency setting signal (0 to 5V, 0 to 10V or 4 to 20mA DC).
905	Frequency setting current gain
990	Buzzer control	Used to produce or mute the operational sound generated when you press the
		keys of the operation panel and parameter unit.

53