Mitsumi electronic 55K, FR-F520-0.75K Jog operation Pr , Pr, Pr jog frequency, Related parameters

PARAMETERS

4.2.10 Jog operation (Pr. 15, Pr. 16)

Pr. 15 "jog frequency" Related parameters

Pr. 20 "acceleration/deceleration

Pr. 16 "jog acceleration/deceleration time"reference frequency"

Pr. 21 "acceleration/deceleration time increments"

Pr. 79 "operation mode selection" Pr. 180 to Pr. 186

(input terminal function selection)

In the external operation mode, jog operation can be started and stopped by the start signal (STF, STR) with the jog signal ON, after selection of the jog operation function using the input terminal function selection. In the PU operation mode, jog operation can also be performed using the PU (FR-DU04/FR-PU04).

#Set the frequency and acceleration/deceleration time for jog operation

Parameter	Factory		Setting Range			Remarks
Number	Setting
15	5Hz		0 to 120Hz
16	0.5 s		0 to 3600 s			When Pr. 21 = 0
			0 to 360 s			When Pr. 21 = 1
	Output frequency (Hz)
			Pr.20
	Pr.15	Jog frequency			Forward
		setting range			rotation		Time
						Reverse
						rotation
				Pr.16
			JOG signal			ON
	Forward rotation STF					ON
	Reverse rotation STR					ON

Note: 1. In S-shaped acceleration/deceleration pattern A, the set time is a period of time required to reach Pr. 3 "base frequency".

2.The acceleration time and deceleration time cannot be set separately for jog operation.

3.The value set in Pr. 15 "jog frequency" should be equal to or greater than the Pr. 13 "starting frequency" setting.

4

75