Samsung NaviBot S SR8980 VCR8980L3K/XEF, VCR8980L3K/XEG, VCR8980L3K/XEO, VCR8980L3K/XET Installing the charger, _21, OPERATING, operating _21, right and within 1 m of the front, 4.Arrange the power cord along the wall

Installing the charger

Power lamp

Charging lamp

1. Install the charger on a fl at surface.

2. There should be no obstacles and cliffs 0.5m to the left and				0.
right and within 1 m of the front.
			about		5m
		5m
	about	0.
			about		1m

3.Install the charger in a location where it can be easily accessed by the vacuum cleaning robot.

OPERATING 03

4.Arrange the power cord along the wall.

5.When the fl oor is made of wood, install the charger in the same direction as the grain of the wood.

Always keep the power cord of the charger plugged NOTE into the power outlet.

-If no power is supplied to the charger, the vacuum cleaning robot will not be able to fi nd the charger and will not be able to charge automatically.

-If the vacuum cleaning robot is separated from the charger, the battery is automatically discharged.

operating _21