Samsung NaviBot S SR8980 VCR8980L3K/XEF, VCR8980L3K/XEG, VCR8980L3K/XEO, VCR8980L3K/XET _49, week, Symptom, Checklist, autoemptier, the dustbin, automatically, does not empty, Measure to Take, robot frequently, The auto-emptier

Symptom	Checklist		Measure to Take
The vacuum cleaning	• Check whether the autoemptier	• Turn on the power switch on the
robot frequently			left side of the autoemptier.
collides with the
		• Plug the power plug into the outlet.
autoemptier.				05
The auto-emptier	• Check whether there is a foreign	•	Clean the fi lter.	TROUBLESHOOTING
does not empty	substance on the fi lter.
the dustbin
	• Check whether there is a foreign	• Remove the foreign substance
automatically.
	substance inside the dustbin.		from the inside of the dustbin.
	• The bottom of the autoemptier is	• Open the bottom of the auto-
	clogged.		emptier using a coin and then
			remove the dust clogging it.
	• Check whether the dustbin	• Close the dustbin cyclone cap.
	cyclone cap exists.
	• Check whether the auto empty	• Press the Auto Empty On/Off
	lamp of the auto-emptier is turned		Select button on the auto-emptier.
	on.
	• Check whether the dustbin is	• Turn off the auto-emptier and then
	separated from the autoemptier.		insert the dustbin fully until it is
			mounted completely.
	• Check whether the fi lter is	• Turn off the auto-emptier and then
	separated from the autoemptier		mount the fi lter onto the dustbin.
	dustbin.
	• Check whether the Power	• Remove any foreign substances
	Brush wrapped in any foreign		such as long hairs or strings
	substances.		wrapped around the power brush.
The suction power of	• Check whether the Full lamp is	•	Empty the dustbin.
the auto-emptier is	turned on.	• Clean the air inlet of bottom.
week.
	• Check whether the air inlet is	• Remove the foreign substance
	clogged by a foreign substance.		from the air inlet.
	• Check whether dust has collected	•	Clean the fi lter.
	on the fi lter.
	• Check whether dust or hairs have	• Open the cyclone cap and then
	collected on the cyclone.		remove any dust and hair.
The vacuum cleaning	• Check whether there is a foreign	• Remove the foreign substance
robot is not charged.	substance on the charging		from the charging terminals.
	terminals.		Turn on the power switch of the
			auto-emptier.
	• Check whether the autoemptier is
	turned on.

troubleshooting _49