Do not move the robotic vacuum cleaner holding the dustbin

CAUTION

part.

 

- This may cause the dustbin to separate, resulting in injury or

 

serious damage to the product.

 

Vacuum cleaning robot may not be able to continue its

NOTE

operation if it is stuck at the entrance or veranda doorsill.

 

- To resume operating, turn the Power Switch off and then on again

 

after moving it to a location where it can continue cleaning.

 

Vacuum cleaning robot cannot completely clean locations that

NOTE

it cannot reach, such as corners, and spaces between sofas

 

and walls.

 

- Please clean these locations occasionally.

 

Dust clusters may remain after cleaning, when the vacuum cleaning robot fails to

NOTE

pick up dust clusters that were formed while cleaning.

-In this case, sweep up the dust with another cleaning tool.

INFORMATION SAFETY 01

CLEANING AND MAINTENANCE

When cleaning the product, do not spray water directly onto CAUTION the exterior or wipe it with a volatile material such as benzene,

thinner or alcohol.

-This may result in critical damage to the product.

The unit must not be disassembled or reconstructed by anyone CAUTION other than a qualified service engineer.

-This may result in damage to the product.

Remove any foreign substances accumulated on the Obstacle WARNING and Cliff sensors on a regular basis.

-Dirt accumulated on the sensors will result in inaccurate functioning of the sensors.

Cliff sensor

Obstacle sensor

safety information _11