Manual Cleaning

You can move the vacuum cleaning robot to clean a particular location directly by using the remote control.

■Move the vacuum cleaning robot to the location where you want to perform manual cleaning.

■You can manually clean using the remote control only.

OPERATING 03

Remote control button

Configuration Sequence

1. Set the mode.2. Cancel the mode.

•When the vacuum cleaning robot is docked with the charger station, manual cleaning is not supported.

NOTE

•If there is no input for about 1 minute to switch to standby mode.

•

Each time you press the Turbo button, the Turbo icon on

CAUTION

the display panel is turned on or off sequentially. When the

 

Turbo icon is turned on, you can start cleaning in Turbo

 

mode.

•Each time you press the Dust Sensor button, the Dust Sensor icon on the display panel is turned on or off sequentially. When the Dust Sensor icon is turned on, you can start cleaning in Dust Sensor mode.

Directional Buttons (Forwards, Left, Right)

A backwards function is not supported.

operating _33