HP Data Explorer 4 3.2.3 Setting Peak Detection Parameters, Before you begin, Setting chromatogram parameters

Peak Detection

3.2.3 Setting Peak Detection Parameters

Before you begin

Setting chromatogram parameters

This section includes:

•Before you begin

•Setting chromatogram parameters

•Setting Basic Settings (spectrum data)

•Setting Peak Processing parameters (spectrum data only)

•Setting Advanced Settings (spectrum data only)

•Resetting Basic Settings

Before setting peak detection, read:

•Section 3.2.1, Strategy for Mariner Peak Detection

• Section 3.2.2, Strategy for Voyager Peak Detection			3
To set chromatogram parameters for data:
1.	Click the Chromatogram window to activate it.
2.	Click the trace of interest.
3.	Click	in the toolbar or select Peak Detection from

the Peaks menu.

The Chromatogram Peak Detection dialog box is displayed (Figure 3-3).

You can click-drag the threshold cursor to adjust the %Base Peak Intensity.

For a description of the parameters in the Chromatogram Peak Detection dialog box, see “Chromatogram settings” on page 3-19.

Data Explorer™ Software User’s Guide 3-11