Peak Labeling
You can apply labels you previously created and saved in
.LBC or .LBS files.
Open the .LBC or .LBS file by clicking 
in the User Label Setup dialog box. Select the file, then click Open.
The labels are imported into the .DAT file and displayed in the label list. You can modify the settings, delete or add labels, and save the changes in a new .LBC or .LBS file.
NOTE: Changes you make to user labels imported into a
.DAT file are not saved in the .LBC or .LBS file from which they originated. Click Save As, then resave the file if you want the changes saved to the originating file.
Select both Enable Labeling and User Labels in the Peak Label dialog box to display user labels. Peaks that do not meet the peak detection criteria are not labeled.
NOTE: If you specify user labels with an X Tolerance that is outside the acquisition range for the data file, the user labels are not displayed. Be aware that the default
3
X Tolerance of 1 may be outside the acquisition range when the chromatogram is displayed in retention time.
Data Explorer™ Software User’s Guide |