Displaying PSD Data

Redisplaying the composite spectrum

NOTE: The entry number in the PSD Segment list above may not correspond to Segment number specified in the Segment list for acquisition (described in the Voyager Biospectrometry Workstation User’s Guide) if you did not acquire all segments, or did not acquire segments in order of decreasing Mirror Ratio. The number above reflects the order of acquisition. For example, if you listed Segments 1 through 5 for acquisition, but acquired Segments 1, 3, and 5, you would see three entries above that correspond to the three acquired segments.

3.

In the Spectrum window, click the first Not Used trace.

 

4.

In the PSD Processing dialog box, double-click the Entry

 

 

 

number of the segment to add.

 

5.

Repeat step 3 and step 4 to display additional segments.

8

6.

To advance through traces, select any trace, then click

 

and

.

 

To redisplay the composite spectrum, click Generate Composite in the PSD Processing dialog box (Figure 8-2).

Data Explorer™ Software User’s Guide

8-5