Voyager Data Examples
Before calibrating To optimize mass accuracy, do the following before calibrating:
1. | Display the spectrum of interest. |
|
Baseline correcting 2. | From the Process menu, select Baseline Correction. |
|
| The spectrum is baseline corrected. For more |
|
| information, see Section 5.8.2, Using Baseline |
|
|
| |
|
| |
Deisotoping 3. | From the Peaks menu, select Peak Deisotoping. | 7 |
| ||
|
|
|
Figure
4.For this example spectrum, specify H for Adduct and C6H5NO for Generic Formula.
5.Click OK.
Figure
Figure
Before Calibration
Data Explorer™ Software User’s Guide |