Manual Calibration

The Edit/Create Reference Peak Information dialog box (Figure 5-6)is displayed.

Figure 5-6 Edit/Create Reference Peak Information

Dialog Box

2.Type the Name and Theoretical m/z for a reference compound, then select the charge state. Optionally, enter the Elemental Composition for the compound.

3.Specify the mass type (Resolved Isotope Mass or Average Mass).

If you are adding masses for highly charged compounds, see “Specifying mass type for highly charged, narrow peaks” on page 5-21.

4.Click Insert.

5. Repeat step 2 through step 4 for remaining compounds.

5

Data Explorer™ Software User’s Guide

5-19