Chapter 5 Examining Spectrum Data

Figure 5-14 Baseline Offset Dialog Box

4.Right-click-drag the left baseline to offset. The selected value is displayed in the Left Baseline field.

5.Right-click-drag the right baseline to offset. The selected value is displayed in the Right Baseline field.

6.To limit the baseline offset to the area between the two selected points, select Only Apply from L to R Baseline Midpoint.

To perform the baseline offset on the entire x-axis, deselect Only Apply from L to R Baseline Midpoint.

7.Click OK.

The offset baseline trace is displayed with a BO trace label.

8.To return to the original trace, see “Returning to the original spectrum” on page 5-3.

5

5-46 Applied Biosystems