Chapter 2 Using Chromatogram and Spectrum Windows
For example, if you select Divide Active Trace to Four when the active trace has a range of 0.0 to 20.0, the active trace is divided into four traces:
• First trace represents the range from 0 to 5
• Second trace represents the range from 4 to 10
• Third trace represents the range from 9 to 16
• Fourth trace represents the range from 15 to 20
2 | NOTE: To restore the display to a single trace, select |
| |
| Remove Inactive Traces from the Display menu. |
2.4.4Adding Traces from
the Same Data File to a Window
This section describes:
•Overview
•Setting the Replace mode
•Adding a trace
Overview By default, the Data Explorer software displays:
Data Type | Window |
|
|
Mariner | Chromatogram and Spectrum. |
|
|
Voyager single | Spectrum only. |
spectrum |
|
|
|
Voyager | Spectrum only. Can also optionally |
multispectrum | display chromatogram. |
|
|
Chromatogram and Spectrum windows each contain one trace (see Figure