HP Data Explorer 4 Calibration results, Applying new constants to the data file, Applying auto calibration settings to other files

Automatic Calibration

Applying new constants to the data file

Calibration resultsApplying auto calibration settings to other files

To save the calibration constants for each spectrum in the data file, select Apply Calibration from the Process menu.

Automatic calibration results are displayed in the Output window (Figure 5-9).

Figure 5-9 Automatic Calibration Results

For each spectrum in the data file, results include:

•Number of peaks matched

•Original and new calibration constants, calibrated mass, and fit errors

•Successful or failed calibration message

To apply auto calibration settings to other files:

1.Extract the .SET information from the data file containing the auto calibration settings by selecting Settings from the File menu, then selecting Save Processing Settings As. For more information, see Section 1.6.5, Extracting and Saving Information from

.DAT, .RSD, and .RCD Files.

2.Copy the settings to the new file by selecting Settings from the File menu, then selecting Restore Processing Settings. For more information, see Section 1.4.2, Customizing Processing and Graphic Settings (.SET).

5

Data Explorer™ Software User’s Guide 5-35