HP Data Explorer 4 Setting Advanced Settings (spectrum data only)

Peak Detection

Setting Advanced Settings (spectrum data only)

To set Advanced Settings that you can apply locally to a selected detection range, and that override the thresholds set in the Basic Settings tab:

1.In the Basic Settings tab, select Use Advanced Settings.

2.Click the Advanced Settings tab in the Spectrum Peak Detection Setup dialog box.

NOTE: If you select Use Resolution Dependent Settings in the Basic Settings tab, Basic Settings override Advanced Settings. The Advanced Settings tab is accessible, but all parameters are dimmed. To make Advanced Settings available for editing, select Use Advanced Settings on the Basic Settings tab.

The Advanced Settings tab is displayed (Figure 3-6).

3

Figure 3-6 Spectrum Peak Detection Setup—

Advanced Settings Tab

Data Explorer™ Software User’s Guide 3-17