Peak Labeling

Figure 3-21 Chromatogram Peak Label Dialog Box

3

 

3.Select Enable Labeling.

4.Set the number of decimal points to be displayed.

5.Select Label Attributes:

•Overlapping— Allows labels to be displayed when peaks are close together.

•Peak bounds— Displays peak start, peak end, and baseline.

•Orientation— Specifies Horizontal, 45-degree, or Vertical labels.

6.Select the label content to display, (for example, Spectrum #, Time, Vial Number).

7.To create custom labels, select User Labels, then click User Label Setup. See Section 3.5.3, Setting Custom Peak Labels.

Data Explorer™ Software User’s Guide

3-55