Mass Deconvolution (Mariner Data Only)
5.Type values for the following masses for the generated
•Center— Center mass
•Half Width— Mass (±) from the Center mass to include in the spectrum
•Increment— Mass increment at which to perform the calculation (0.1 for resolved isotope peaks, 1.0 for unresolved isotope peaks, >1.0 for noisy trace)
Figure
Dialog Box
6.Select or type the mass of the adduct ion to use in the calculation. The mass of a proton (H+) is selected by default.
7.Click OK.
The deconvoluted trace (with a DECONV trace label) | 5 |
replaces the original trace. |
8.To return to the original trace, see “Returning to the original spectrum” on page
Data Explorer™ Software User’s Guide |