Managing Files
NOTE: To export calibration constants used to | 1 | |
| ||
acquire the data, select Mass Calibration from |
| |
the Process menu, then select the Revert to |
| |
Instrument Calibration before exporting. For |
| |
more information, see Section 5.3.4, Reverting to |
| |
| ||
| ||
|
|
|
•Configuration— To export .BIC or .MSM files (.MSM— Mariner data only).
NOTE: To access the instrument settings for each spectrum in a data file acquired using a Mariner MS Method, you must first extract the .MSM file from the data file as described above. Then export the .BIC files from the .MSM file using the Export button in the MS Method editor. For more information on exporting a .BIC file from .MSM, see the Mariner Workstation User’s Guide.
3.In the Save As dialog box, type a name for the exported file, then click Save.
Saving .SET files To save processing and graphic settings (.SET) from a .DAT or results file:
1.Open or activate the .DAT, .RSD or .RCD file.
2.From the File menu, select Settings, then select one of the following:
•Save Processing Settings As
•Save Graphic Settings As
•Save Graphic/Processing Settings As
3.In the Save As dialog box, type a name for the .SET file, then click OK.
For information, see Section 1.4.2, Customizing Processing and Graphic Settings (.SET).
Data Explorer™ Software User’s Guide |