Output window

Output window tabs

Parts of the Data Explorer Window

The Output window (see Figure 1-3 on page 1-11)displays

tabs at the bottom that you can click to switch between the 1 types of information displayed:

•Result— Displays results generated using commands on the Process, Tools, and Applications menus. For more information on results, see:

•Section 5.3, Manual Calibration, or Section 5.4, Automatic Calibration

•Section 5.6, Mass Deconvolution (Mariner Data Only)

•Section 6.2, Using the Isotope Calculator

•Section 6.3, Using the Mass Resolution Calculator

•Section 6.4, Using the Signal-to-Noise Ratio Calculator

•Chro Peak List — Displays results of chromatogram peak detection and integration. For more information, see Section 3.3, Peak List.

•Spectrum Peak List— Displays results of spectrum peak detection, integration, and centroiding. For more information, see Section 3.3, Peak List.

•Sample Info— For data files, displays the:

•Software version used for acquisition

•Acquisition time and sample comments entered when data was acquired

For result files (.RCT, .RST, .RCD, .RSD), displays any processing functions that have been performed and saved in the result file.

Data Explorer™ Software User’s Guide

1-15