Adjusting the Baseline
4.7 Adjusting the BaselineThis section includes:
•Using Baseline Offset
•Using Baseline Correction
4.7.1Using Baseline Offset
Use the Baseline Offset command to offset the
To use Baseline Offset:
1.Activate the window on which you want to perform the offset.
NOTE: You can select a Chromatogram or Spectrum window. If you do not activate the correct type of window before performing the next step, the software does not select values when you
4
2.Select Duplicate Active Trace from the Display menu to keep the original data displayed after processing.
3.From the Process menu, select Baseline Offset.
Data Explorer™ Software User’s Guide |