Peak Detection
NOTE:
For more information, see Section 3.1.2, The
7.To apply settings to all traces, select Use same settings for all traces in view.
To set parameters independently for all traces in a window, deselect Use same settings for all traces in view.
8.Type the Mass Resolution value to use for peak detection. The default value for the type of data displayed is acceptable for most applications. Defaults are listed in “Basic Settings (spectrum data only)” on page
|
| 3 |
NOTE: The Mass Resolution you set here is also used | ||
by the Elemental Composition Calculator, the Elemental |
| |
Targeting Application, and the Default Smoothing |
| |
function. For more information, see Section 6.1, Using |
| |
| ||
| ||
| ||
|
|
|
9.Click Apply to accept the parameters and leave the dialog box open, or click OK to accept the parameters and close the dialog box.
Data Explorer™ Software User’s Guide |